产品介绍
产品详细说明：
产品结构特点 Products design features
阀体有铸造和焊接两种结构。
Cast and weld two structures with the body.
阀座采用O形密封和施加预紧力的浮动阀座结构，使阀门进出口双向密封；并且该结构的启闭力矩仅为普通阀门的1/2，能达到松开、关阀门。
The seat ring uses the floating seat ring structure with o-sealed and pre-tightening force applied to have inlet and outled dual-way sealed;and the open-close moment with this structure is 1/2 that of the common valves only,able to lightly open and close valves.
阀座采用密封面上镶嵌PTFE，具有PTFE对金属和金属对金属的双重密封，PTEF密封面同时清除闸板赃物的作用。
The seat ting uses the sealing face inlaid with PTEF,so has dual seals of PTEF to metal to metal,the PTEF sealing face also acts as removing the dirt on the wedge disc.
金属对金属密封的阀门，阀体外部没有注油脂结构，油脂通过注脂器、阀座进入阀门密封面，使阀门达到零泄露。
For the valve with the metal to metal seal,there is grease injector outside of it,grease gets into the sealing face through the injector and the seat ring to have the valve up to null leak.
带导流孔阀门的闸板，无论是全开或是全关始终与封面吻合，密封面得到保护不受介质直接冲刷，从而延长使用寿命。
The wedge disc of the valve with flow guide hole is always fitted with the sealing face whether in full open or full close status to have the sealing face protected without being directly eroded by the the medium so as to extend the duration.
阀门在全开时，通道平滑为直线，流阻系数极小，无压力损失，可通毛球清扫管道。
When fully opened,the valve's channel is smooth and linear,with an extrely small flow resisting coefficient and no pressure loss,and the pipeline can be cleaned with hair-ball through it.
本阀门采用带自密封能力的填料结构，无需经常调节，开、关极为轻便，且密封性可靠，填料函处设有辅助油脂注入结构，密封性能绝对可靠，真正达到零泄露；解决了通用阀门填料处最容易外漏的弊病。
This valve uses the packing structure with the ability of self-seal,needs no constant adjustment,features very light open and close and get a true null leak,settling the problem for the packing place of universal valves to be easiest leak outward.
阀门关闭时能自动卸掉内腔高压（详见工作原理图），保证使用安全。
Automatic removal of the high pressure internal cavity when the valve is about to close(see the working principle diagram for the details)so as to ensure safty.
全封闭结构，防护性能好，可适用全天候要求。
Fully sealed structure leaves a good protective propety,suitable for the requirement of 24-hour duty.
阀门没有指示杆或观察窗以表示阀门的启闭情况。
Anindcation rod or viewing window is set with the valve to show the open-close condition.
